Conscientious compilation

As we all know, a lot of efforts need to be made to develop a 640-722 learning prep. Firstly, a huge amount of first hand materials are essential, which influences the quality of the compilation about the Implementing Cisco Unified Wireless Networking Essentials v2.0 actual test guide. We have tried our best to find all reference books. Then our experts have carefully summarized all relevant materials of the 640-722 exam. Also, annual official test is also included. They have built a clear knowledge frame in their minds before they begin to compile the 640-722 actual test guide. It is a long process to compilation. But they stick to work hard and never abandon. Finally, they finish all the compilation because of their passionate and persistent spirits. So you are lucky to come across our 640-722 exam questions. Once you choose our products, you choose high-efficiency exam preparation materials which will help you pass exam for sure. We are absolutely responsible for you. Stop hesitation!

Knowledge makes prominent contributions to human civilization and progress. In the 21st century, the rate of unemployment is increasing greatly. Many jobs are replaced by intelligent machines. You must learn practical knowledge such as our Implementing Cisco Unified Wireless Networking Essentials v2.0actual test guide, which cannot be substituted by artificial intelligence. Now, our 640-722 learning prep can meet your demands. You will absorb the most useful knowledge with the assistance of our study materials. The 640-722 certificate is valuable in the job market. But you need professional guidance to pass the exam. For instance, our 640-722 exam questions fully accords with your requirements.

Constant research and development

Our Implementing Cisco Unified Wireless Networking Essentials v2.0 exam questions are famous for the good performance and stale operation. Customers usually attach great importance on the function of a product. So after a long period of research and development, our 640-722 learning prep has been optimized greatly. We can promise that all of your operation is totally flexible. Even if we come across much technology problems, we have never given up. Also, we take our customers' suggestions of the 640-722 actual test guide seriously. Sometimes, we will receive some good suggestions from our users. Once our researchers regard it possible to realize, we will try our best to perfect the details of the 640-722 learning prep. We are keeping advancing with you. You will regret if you do not choose our study materials.

Professional materials

Professional guidance is indispensable for a candidate. As a leader in the field, our Implementing Cisco Unified Wireless Networking Essentials v2.0 learning prep has owned more than ten years' development experience. Thousands of candidates have become excellent talents after obtaining the 640-722 certificate. If you want to survive in the exam, our 640-722 actual test guide is the best selection. Firstly, our study materials can aid you study, review and improvement of all the knowledge. In addition, you do not need to purchase other reference books. Our 640-722 exam questions are able to solve all your problems of preparing the exam. Of course, our study materials are able to shorten your learning time. You will have more spare time to do other things. And we can ensure you to pass the 640-722 exam.

Cisco 640-722 Exam Syllabus Topics:

Cisco Implementing Cisco Unified Wireless Networking Essentials v2.0 Sample Questions:

1. What are the interface statuses of a lightweight AP working in rogue-detection mode?

A) radios turned on, Ethernet interface status controlled by Cisco WLC
B) radios and Ethernet interfaces up
C) radios turned on, Ethernet interface shut down
D) radios turned off, Ethernet interface up

2. Cisco 640-722 Exam
Instructions
-THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION. -To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. -There is one multiple-choice question with this task. Be sure to answer the question before selecting the Next button.
Scenario
You are deploying a small wireless test network in a lab. The network is made up of a wireless controller (WLC1), a dual radio access point (AP1) and a switch (SW1) that is configured as a DHCP server. The IP subnet being used for this network is 10.10.10.0/24. You would like to test how clients join the network and from which DHCP server they receive an address.



Cisco 640-722 Exam
Cisco 640-722 Exam


Cisco 640-722 Exam

Cisco 640-722 Exam

Cisco 640-722 Exam
Cisco 640-722 Exam

All equipment is operational. Through which two methods can a wireless client receive an IP address when associating to the WLAN? (Choose two.)

A) Tie clients can receive an IP address from WLC1.
B) The clients will not receive an IP address from either DHCP server because of overlapping address ranges.
C) The clients can receive an IP address from SW1.
D) The clients can use a static IP address.
E) The clients can receive an IP address in a round-robin manner from either SW1 or WLC1.

3. What is the purpose of the Log Analysis tab on the Client Troubleshooting page in Cisco WCS?

A) The tab shows logs from the past hour for the client that is having problems.
B) After you click start, the tab shows debug information for the client that is trying to re-associate.
C) The tab generates a report from historical logs for the client that is having problems.
D) The tab searches the logs for similar problems of other clients and generates a report.

4. Instructions
-Refer to the exhibits to answer the questions related to this task.
-THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
-To access the multiple-choice question, click on the numbered box on the left of the top panel.
-There is one multiple-choice question with this task. Be sure to answer the question before
selecting the Next button.
Scenario You are deploying a small wireless test network in a lab. The network is made up of a wireless controller (WLC1), a dual radio access point (AP1) and a switch (SW1) that is configured as a DHCP server. The IP subnet being used for this network is 10.10.10.0/24.


Cisco 640-722 Exam

Cisco 640-722 Exam


Cisco 640-722 Exam
In setting up the wireless network, it is desired that the DHCP server that is configured in WLC1 provides IP addressing to the WLAN. When devices attempt to join the network, they fail to receive an IP address in the range provided by the DHCP server in WLC1, but they do receive an IP address from the DHCP server in SW1. What is causing this issue?

A) The external DHCP server in SW1 will always be the preferred DHCP server and WLC1 will always be the secondary DHCP server in the WLAN.
B) The primary DHCP server address in WLC1 is incorrect.
C) The primary DHCP server configured in WLC1 is not enabled.
D) The DHCP server address for SW1 needs to be removed from the DHCP server configuration in WLC1.

5. What three components are required to configure Mobility Group Members between Wireless LAN Controllers? (Choose three.)

A) Controller MAC Address
B) Controller AP Management IP Address
C) Controller Mobility Group Name
D) Controller Multicast IP Address
E) Controller RF Group Name
F) Controller Virtual IP Address
G) Controller Management IP Address

Solutions: