Updated Oct-2022 C-HANATEC-17 Free Exam Files Downloaded Instantly
Practice Exams and Training Solutions for Certifications
Brief Overview of certification Topics of SAP C_HANATEC_17 Exam
- SAP HANA Monitoring and Troubleshooting
- SAP HANA Database Administration
- Database Migration Options for SAP HANA
- SAP HANA Architecture and Deployment Options
NEW QUESTION 45
Which operation is executed before a table is repartitioned?
- A. Reorganization
- B. Delta merge
- C. Snapshot
- D. Savepoint
Answer: B
NEW QUESTION 46
You need to analyze the high CPU load of running thread in more detail in the Thread Monitor. Which parameters do you need to change? Note: There are 2 correct answers.
- A. threshold_cpu_time
- B. enable_tracking
- C. load_monitor_granularity
- D. cpu_time_measurement_mode
Answer: C,D
NEW QUESTION 47
Which of the following actions are audited by default in SAP HANA? There are 2 correct answers to this question.
- A. Creation, modification or deletion of audit policies
- B. Changes to system configuration
- C. Installation of SAP HANA license
- D. Changes to system configuration
- E. Deletion of audit entries from the audit trail
Answer: A,E
NEW QUESTION 48
Which SQL privileges can you grant to another user?
- A. CATALOG READ
- B. ATTACH DEBUGGER
- C. DATA ADM IN
- D. CREATE SCHEMA
Answer: A
NEW QUESTION 49
SQL statements are rejected by the Workload Admission Control application, and you need to investigate the reason. Which parameters do you adjust to manage the event log? There are 2 correct answers to this question.
- A. max_queue_size
- B. record_limit
- C. queue_timeout
- D. queue_wait_time_threshold
Answer: B,D
NEW QUESTION 50
Which preparation steps do you need to perform before replaying a captured workload using the SAP HA NA capture and replay tool? There are 3 correct answers to this question.
- A. Store the logon credentials of the replayer user in the secure store.
- B. Create a replayer user account on the target operating system.
- C. Preprocess the captured workload on the source system.
- D. Create a replayer user account in the target database system.
- E. Restore the source system tenant backup to the target tenant.
Answer: A,C,D
NEW QUESTION 51
Which of the following privileges allow read access to data in SAP HANA information models depending on certain values or combination of values?
- A. Analytic Privileges
- B. Object Privileges
- C. Package Privileges
- D. System Privileges
Answer: A
NEW QUESTION 52
Which SAP HANA cockpit application can you use to investigate a system offline situation? Please choose the correct answer.
- A. Out-of-memory event monitor
- B. Troubleshoot unresponsive system
- C. Full system information dump
- D. CPU usage monitor
Answer: B,C
NEW QUESTION 53
Which of the following elements are valid rules for the location of the backup files? There are 3 correct answers to this question.
- A. The backup folder will be created automatically when the backup process is started.
- B. The Volume ID is automatically added to a specified file name.
- C. The backup ID is unique for each persistence only.
- D. The backup files should never be in the same directory and on the same file system as u data.
Answer: B,C,D
NEW QUESTION 54
Which of the following elements are required for implementing a database copy? There are 2 correct answers to this question.
- A. A data backup (file-based backups or backups using a third-party backup tool) or a storage snapshot of the source system is available.
- B. The target database must have a the same or higher version than the source database.
- C. Source and target databases can have different number and types of services.
- D. You don't have to be concerned about disk space and memory of the target database.
Answer: A,B
NEW QUESTION 55
What is a prerequisite before you can install SAP HANA Cockpit 2.0 as a central monitoring tool for productive SAP HANA databases?
- A. A central SAP HANA database 2.0 with SAP HANA extended application services, advanced model (XS Advanced) installed
- B. SAP Netweaver 7.5x on SAP HANA 2.0 with ABAP Core Data Services (CDS) and SAP Fiori installed
- C. A central SAP HANA database 2.0 SPS05 multitenant database system with at least 16 GB of RAM
- D. A dedicated server with at least 16 GB RAM with SUSE Linux Enterprise Server (SLES) or Red Hat Enterprise Linux (RHEL)
Answer: D
NEW QUESTION 56
Which tool do you use to investigate an SAP HANA system that is started but can't be reached using SQL?
There are 2 correct answers to this question.
- A. Sapcontrol
- B. HANASitter
- C. HDBAdmin
- D. hdbcons
Answer: A,D
NEW QUESTION 57
Which rules should you consider when creating a table distribution plan for SAP Business Suite on SAP HANA to get the best possible results? There are 2 correct answers to
- A. Keep the number of partitions per table high.
- B. Keep the number of partitioned tables low.
- C. Keep the number of key columns low.
- D. Keep all partitions on different hosts.
Answer: A,C
NEW QUESTION 58
In single-host SAP HANA systems, you can use plain attached storage devices, such as Small Computers System Interface hard drives, solid-state drives (SSDs), or storage area networks (SANs).
However, to build a multi-host system with failover capabilities, the storage must ensure which of the following conditions?
There are 2 correct answers to this question.
- A. The standby host has file access
- B. The standby host has access to write to files
- C. SYSTEM users replaced by standby host
- D. The failed worker host no longer has access to write to files
Answer: A,D
NEW QUESTION 59
Which of the following recovery types is not supported for delta backups?
- A. Recover the database to a specific point in time.
- B. Recover the database to its most recent state.
- C. Recover the database to a specific data backup.
Answer: C
NEW QUESTION 60
You register a new resource in SAP HANA cockpit 2.0. What prerequisite does the resource require?
- A. A user with DATA ADMIN privileges and SELECT on _SYS_TELEMETRY schema
- B. The target database on SAP HANA 2.0 SPS00 or higher
- C. A multitenant configuration with SYSTEMDB
- D. A user with CATALOG READ privileges and SELECT on _SYS_STATISTICS schema
Answer: D
NEW QUESTION 61
Which tools can you use to start and stop tenants in an SAP HANA database? Note: There are 2 correct answers.
- A. SAP HANA Studio - System view
- B. sapcontrol
- C. SAP HANA cockpit 2.0 - Manage Databases
- D. hdbsql
Answer: C,D
NEW QUESTION 62
Which user management tasks can be performed by a Lightweight Directory Access Protocol (LDAP) server?
There are 2 correct answers to this question.
- A. User mapping
- B. Password policy configuration
- C. User creation
- D. Role assignment
Answer: C,D
NEW QUESTION 63
You plan to migrate a non-SAP database to SAP HANA using the database migration option (DMO) of the Software Update Manager. Which advanced DMO options can you adjust to speed up the migration? There are 2 correct answers to this question.
- A. SQL processes
- B. R3trans processes
- C. TP processes
- D. SAPup processes
Answer: A,B
NEW QUESTION 64
Which of the following actions are possible when managing roles? There are 3 correct answers to this question.
- A. A role can contain other roles and privileges at the same time
- B. A role can contain either other roles or privileges but not both together
- C. A role can contain multiple other roles
- D. A role can be nested to multiple other roles
Answer: A,C,D
NEW QUESTION 65
Which trace do you use to create a graphical representation of an individual SQL Statement?
- A. Expensive statements trace
- B. SQL trace
- C. Performance trace
- D. Plan trace
Answer: C
NEW QUESTION 66
For which scenarios is it mandatory to define the authorizations at HANA Level? There are 2 correct answers to this question.
- A. Business Suite on HANA
- B. SAP S/4HANA
- C. Web-based native applications based on XS
- D. SAP HANA Live for SAP Business Suite
Answer: C,D
NEW QUESTION 67
Which default users will be created during the installation of the SAP HANA database system? There are 2 correct answers to this question.
- A. <sid>crypt
- B. Idapadm
- C. sapadm
- D. sap<sid>
Answer: C,D
NEW QUESTION 68
......
SAP C-HANATEC-17 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Brief Overview of importance of SAP C_HANATEC_17 Exam Certification
SAP HANA is a revolutionary new platform for Big Data analytics and data management. As a result, it has created a lot of interest amongst the SAP community, and the number of SAP HANA certified individuals has increased rapidly over the last few years. SAP C_HANATEC_17 Dumps are designed to verify that candidates have the knowledge and skills required by a SAP HANA technology consultant. Improve your employability by becoming an SAP HANA certified professional. Actual certification exam questions from actual exams are available. Prepare for your next certification exam with this SAP C_HANATEC_17 practice test. Product quality is very high and provides you with comprehensive content that can help you in any way possible. Guarantee that you pass the real SAP C_HANATEC_17 Exam with this practice test. Send us your feedback after using this practice test. Updates to this practice test will be made frequently to ensure that you always stay ahead of the competition. Study the question topics, formats, and the answers provided in the practice test and make sure that you prepare yourself for the real exam. Update the demo practice test as you go through the preparation process. Customer support service is available 24/7. Replication of the actual exam scenario can be made possible by taking the practice test. Outcome based testing is available in the practice test.
Q&As with Explanations Verified & Correct Answers: https://actualtests.realvalidexam.com/C-HANATEC-17-real-exam-dumps.html
