PCNSC Dumps - Kickstart your Career with Real Updated Questions
Earn Quick And Easy Success With PCNSC Dumps
NEW QUESTION # 20
In High Availability, which information is transferred via the HA data link?
- A. heartbeats
- B. session information
- C. HA state information
- D. User-ID information
Answer: B
NEW QUESTION # 21
An administrator has enabled OSPF on a virtual router on the NGFW OSPF is not adding new routes to the virtual router.
Which two options enable the administrator top troubleshoot this issue? (Choose two.)
- A. Add a redistribution profile to forward as BGP updates.
- B. View System logs.
- C. View Runtime Status virtual router.
- D. Perform a traffic pcap at the routing stage.
Answer: B,C
NEW QUESTION # 22
Which of the following must be enabled to use Threat Prevention features such as Anti-Virus and Anti-Spyware on a firewall?
- A. GlobalProtect Subscription
- B. WildFire Subscription
- C. URL Filtering
- D. Security Profiles
Answer: D
NEW QUESTION # 23
A customer has a five-year-old firewall in production in the time since the firewall was installed, the IT team deleted unused security policies on a regular basis but they did not remove the address objects and groups that were part ofthese security policies.
What is the best way to delete all of the unused address objects on the firewall?
- A. Search each address object with Global Find and delete if it shows that the address object is not referenced.
- B. Go to Address Objects under the Objects tab and click on Remove unused objects.
- C. Import the configuration in Expedition, remove unused address objects, and reimport the configuration.
- D. Using CLI execute requestconfiguration address-objectsremove-unused-objects.
Answer: D
Explanation:
To delete all of the unused address objects on the firewall, the best method is:
B:Using CLI executerequest configuration address-objects remove-unused-objects This CLI command is designed to identify and remove all unused address objects in the firewall's configuration. It is the most efficient and accurate method for cleaning up unused objects without manually checking each one.
References:
* Palo Alto Networks - PAN-OS CLI Quick Start:
* https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-cli-quick-start
* Palo Alto Networks - Removing Unused Address Objects: https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 24
Your customer believes that the Panorama appliance is being overwhelmed by the logs from deployed Palo Alto Networks Next-Generation Firewalls.What CLl command can you run to determine the number oflogs per second sent by each firewall?
- A. logging status
- B. debug log-receiver statistics
- C. show log traffic
- D. debug log-sender statistics
Answer: B
Explanation:
To determine the number of logs per second sent by each firewall to a Panorama appliance, the appropriate CLI command to use is:
D:debug log-receiver statistics
This command provides detailed statistics about the logs being received by the Panorama, including the rate at which logs are being sent by each connected firewall. This information can help identify whether the Panorama is being overwhelmed by the volume of logs and which firewalls are contributing the most to the log traffic.
References:
* Palo Alto Networks - CLI Commands for Troubleshooting Panorama: https://docs.paloaltonetworks.com
* Palo Alto Networks - Managing Logs and Log Forwarding:
https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 25
A customer has deployed a GlobalProtect portal and gateway as its remote-access VPN solution for its fleet of Windows 10 laptops The customer wants to use Host information Profile (HIP) data collected at the GlobalProtect gateway throughout its enterprise as an additional means of policy enforcement What additional licensing must the customer purchase?
- A. WildFire license
- B. DNS Security on the perimeter firewall
- C. GlobalProtect license for each firewall that will use HIP data to enforce policy
- D. GlobalProtect license for the gateway firewall
Answer: C
Explanation:
To utilize Host Information Profile (HIP) data collected at the GlobalProtect gateway for policy enforcement throughout the enterprise, the customer needs to purchase aGlobalProtect license for each firewall that will use HIP data to enforce policy. The GlobalProtect license enables the firewall to collect and use HIP data to create policies based on the security posture of the endpoints.
References:
* Palo Alto Networks - GlobalProtect Licensing:
* https://docs.paloaltonetworks.com/globalprotect/10-0/globalprotect-admin/globalprotect-licenses
NEW QUESTION # 26
SSL Forward Proxy decryption is enabled on (he firewall When clients use Chrome to browse to HTTPS sites, the firewall returns the Forward Trust certificate, even when accessing websites with invalid certificates The clients need to be presented with a browser warning error with the option to proceed to websites with invalid certificates Which two options will satisfy this requirement? (Choose two.)
- A. remove the Forward Untrust option from the Forward Trust certificate
- B. create a Decryption Profile with the Block sessions with expired certificates option enabled
- C. create a PKI signed Forward Unlrust enabled certificate
- D. create a self-signed Forward Untrust enabled certificate
Answer: B,D
Explanation:
When SSL Forward Proxy decryption is enabled, and clients using Chrome need to see browser warnings for websites with invalid certificates, the following options will satisfy the requirement:
A:Create a Decryption Profile with the Block sessions with expired certificates option enabled: This option ensures that sessions with expired certificates are blocked, which will present a warning to the user.
B:Create a self-signed Forward Untrust enabled certificate: This certificate will be used for websites with invalid or untrusted certificates, prompting the browser to display a warning.
These configurations ensure that users are properly warned when accessing sites with invalid certificates, allowing them to decide whether to proceed.
References:
* Palo Alto Networks - SSL Decryption Best Practices: https://docs.paloaltonetworks.com/best-practices
* Palo Alto Networks - Configuring SSL Forward Proxy: https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 27
In a multi-tenant environment, what feature allows you to assign different administrators to different tenants?
- A. Admin Roles
- B. Device Groups
- C. Virtual Systems
- D. Access Domains
Answer: D
NEW QUESTION # 28
An administrator encountered problems with inbound decryption. Which option should the administrator investigate as part of triage?
- A. firewall connectivity to a CRL
- B. Security policy rule allowing SSL to the target server
- C. importation of a certificate from an HSM
- D. Root certificate imported into the firewall with "Trust" enabled
Answer: B
NEW QUESTION # 29
Identity the Stakeholder with their Role when planning a Firewall Panorama, and Cortex XDR Deployment
Answer:
Explanation:
Explanation:
* Security Engineer- Determines the security, logging, reporting requirements and manages the policy.
* System Administrator- Manages the software distribution method for the Cortex XDR Client.
* Security Operations Analyst- Manages the alerts and responds to threats identified on the network or endpoints.
* Network Engineer- Manages the routing, switching, and general device interconnectivity.
When planning a deployment involving Firewall, Panorama, and Cortex XDR, each stakeholder plays a specific role:
* Security Engineer- This role involves defining and managing security policies, logging configurations, and reporting requirements to ensure compliance and optimal security posture. They are responsible for the overall security configuration and implementation.
NEW QUESTION # 30
In Panorama the web interface displays the security rules in evaluation order Organize the security rules m the order in which they will be evaluated?
Answer:
Explanation:
Explanation:
In Panorama, security rules are evaluated in a specific order to determine which rule applies to the traffic. The correct evaluation order is as follows:
* Shared pre-rules(evaluated first)
* Device group pre-rules(evaluated second)
* Local firewall rules(evaluated third)
* Device group post-rules(evaluated fourth)
* Shared post-rules(evaluated fifth)
This order ensures that the most generic rules (shared across all devices) are evaluated first, followed by more specific rules at the device group and local firewall levels, and then the post-rules.
References:
* Palo Alto Networks - Panorama Admin Guide:
https://docs.paloaltonetworks.com/panorama/10-0/panorama-admin/policy/policy-precedence-and-evaluati
* Palo Alto Networks - Security Policy Evaluation: https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 31
Match the task for server settings in group mapping with its order in the process.
Answer:
Explanation:
Explanation:
To configure group mapping on a Palo Alto Networks firewall, follow these steps in order:
* Navigate to Device > User Identification > Group Mapping:
* This is the initial step where you access the group mapping settings in the web interface.
* Add a new group mapping:
* After navigating to the group mapping section, the next step is to add a new group mapping configuration.
* Enter a unique name to identify the group mapping configuration:
* Provide a unique and descriptive name for the new group mapping configuration to easily identify it.
* Create an LDAP Server Profile:
* This step involves creating an LDAP Server Profile, which defines the connection settings for the LDAP server that will be queried for user and group information.
* Select the LDAP Server Profile:
* Finally, associate the created LDAP Server Profile with the group mapping configuration. This links the group mapping to the specific LDAP server.
Order in Process:
* Navigate to Device > User Identification > Group Mapping
* Add a new group mapping.
* Enter a unique name to identify the group mapping configuration.
* Create an LDAP Server Profile.
* Select the LDAP Server Profile.
References:
* Palo Alto Networks - Configuring Group Mapping:
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-admin/user-id/map-users-to-groups
* Palo Alto Networks - User-ID Agent and Group Mapping Configuration:
https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 32
An administrator sees several inbound sessions identified as unknown tcp in the Traffic logs. The administrator determines that these sessions are from external users accessing the company's propriety accounting application. The administrator wants to reliability identity this as their accounting application and to scan this traffic for threats.
Which option would achieve this result?
- A. Create an Application Override policy
- B. Create a custom App-ID and use the "ordered condition cheek box.
- C. Create an Application Override policy and a custom threat signature for the application.
- D. Create a custom App-ID and enable scanning on the advanced tab.
Answer: C
NEW QUESTION # 33
A customer has a pair of Panorama HA appliances tunning local log collectors and wants to have log redundancy on logs forwarded from firewalls Which two configuration options fulfill the customer's requirement for log redundancy? (Choose two)
- A. A Collector Group must contain at least two Log Collectors
- B. Panorama operational mode needs to be Dedicated Log Collector
- C. Panorama configured in HA provides log redundancy
- D. Log redundancy must be enabled per Collector Group
Answer: A,D
Explanation:
To fulfill the customer's requirement for log redundancy on logs forwarded from firewalls in a Panorama HA setup, the following configuration options are necessary:
B:Log redundancy must be enabled per Collector Group: This ensures that logs are redundantly stored across multiple log collectors within the same collector group.
C:A Collector Group must contain at least two Log Collectors: For log redundancy to work, there must be at least two log collectors in the collector group so that if one log collector fails, the other can continue to collect logs.
These configurations ensure that log data is replicated across multiple log collectors, providing redundancy and resilience in the event of a failure.
References:
* Palo Alto Networks - Configure Log Forwarding and Redundancy:
https://docs.paloaltonetworks.com/panorama/10-0/panorama-admin/manage-log-collection/configure-log-f
* Palo Alto Networks - Panorama High Availability:
https://docs.paloaltonetworks.com/panorama/10-0/panorama-admin/set-up-panorama/set-up-high-availabil
NEW QUESTION # 34
Which version of Global Protect supports split tunneling based on destination domain, client process, and HTTP/HTTPs video streaming application?
- A. Glovbalprotect version 4.1 with PAn-OS 8.1
- B. Glovbalprotect version 4.0 with PAn-OS 8.0
- C. Glovbalprotect version 4.1 with PAn-OS 8.0
- D. Glovbalprotect version 4.0 with PAn-OS 8.1
Answer: D
NEW QUESTION # 35
Which three steps must an administrator perform to load only address objects from a PAN-OS saved configuration file into a VM-3C0 firewall that is in production? (Choose three)
- A. use the device configuration import in Panorama
- B. enter the configuration mode from the CLI
- C. use load config partial command
- D. Import named configuration snapshot through the web interface
- E. load the config in the web interface and commit
Answer: B,C,E
Explanation:
To load only address objects from a PAN-OS saved configuration file into a VM-300 firewall that is in production, the administrator must follow these three steps:
C:Enter the configuration mode from the CLI: This step is necessary to prepare the firewall to accept the new configuration.
D:Use the load config partial command: This command allows the administrator to load only specific parts of the configuration, such as address objects, from a saved configuration file without overwriting the entire configuration. The command syntax typically looks like this:load config partial from <source-configuration> mode merge exclude everything but address objects.
E:Import named configuration snapshot through the web interface: This involves importing the configuration snapshot that contains the address objects through the web interface, but only after ensuring that the specific address objects are targeted and not the entire configuration.
References:
* Palo Alto Networks - PAN-OS CLI Quick Start:
* https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-cli-quick-start
* Palo Alto Networks - How to Use the Partial Configuration Load Feature:
https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 36
Which feature allows you to use multiple links simultaneously to balance the load in a Palo Alto Networks firewall?
- A. ECMP (Equal-Cost Multi-Path)
- B. Aggregate Ethernet
- C. Virtual Wire
- D. High Availability
Answer: A
NEW QUESTION # 37
......
Palo Alto Networks Certified Network Security Consultant (PCNSC) certification exam is designed for professionals who are interested in validating their expertise in network security using the Palo Alto Networks platform. Palo Alto Networks Certified Network Security Consultant certification exam is intended to test the candidate's knowledge of the products, technologies, and best practices related to network security implementation using Palo Alto Networks technologies.
Free PCNSC pdf Files With Updated and Accurate Dumps Training: https://actualtests.realvalidexam.com/PCNSC-real-exam-dumps.html
