Free Oracle 1z0-996-22 Exam Questions and Answer from Training Expert RealValidExam
Top Oracle 1z0-996-22 Courses Online
NEW QUESTION 26
Which statement is true about specifications?
- A. A single specification can only be used on one asset.
- B. Specifications apply only to assets and not to components.
- C. Specifications include the inspection history of an asset.
- D. Specifications can include peer specifications.
Answer: A
NEW QUESTION 27
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Sum Check Validation
- B. Critical Validation
- C. Multiplier Check Validation
- D. Critical Validation, High/Low Check Validation, and Sum Check Validation
- E. High/Low Check Validation
Answer: C
NEW QUESTION 28
Which option correctly describes the high-level process from loading measurements through calculating usage?
- A. 1. Load Initial Measurements
2. Verify, evaluate, and enter Initial Measurements
3. Create Final Measurements
4. Calculate Usage - B. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Calculate Usage - C. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Update Initial Measurements - D. 1. Load Initial Measurements
2. Validate, evaluate, and estimate Initial Measurements
3. Update Initial Measurements
4. Calculate Usage
Answer: A
NEW QUESTION 29
Which describes derived values and their relationship with Final Measurements?
- A. Final Measurements can have multiple derived values, which represent other values for the same Final Measurement Date/Time.
- B. Final Measurements can have one derived value, which represents an alternative for the same Final Measurement Date/Time.
- C. Derived values can have multiple Final Measurements, which represent other values for the same Initial Measurement Date/Time.
- D. Final Measurements can have one derived value, which represents the Initial Measurement for the same Final Measurement Date/Time.
Answer: D
NEW QUESTION 30
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Device Configuration
- B. Device
- C. Smart Meter Command
- D. Service Point
Answer: D
NEW QUESTION 31
In addition to sets of procedures, and careful handling instructions for hazardous or delicate materials, what can Specifications include to provide information about assets or other entities?
- A. Conditions
- B. Rules
- C. Attributes
- D. Specifications
Answer: D
NEW QUESTION 32
Which statement supports usage transaction calculation?
- A. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
- B. Bill determinants are derived from the initial measurement data of the measuring components devices installed at the usage subscription's service points during calculation period.
- C. Bill determinants are derived from the final measurements for only interval measuring components or devices installed at the usage subscription's service points during the calculation period.
- D. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
Answer: A
NEW QUESTION 33
How many bill segment-related financial transactions do pay plans have?
- A. depends on the number of bills that will contain the customer's pay plan commitments
- B. one
- C. none
- D. unlimited
- E. depends on the number of payments that is part of the pay plan
Answer: A
NEW QUESTION 34
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
- B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- C. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- D. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
- E. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
Answer: C
NEW QUESTION 35
When a customer has a specific price for a defined quantity which is different to other customers, where is this specific price for the related Bill Factor defined?
- A. Calculation Rule
- B. Bill Factor Characteristic
- C. Bill Factor Value
- D. Service Agreement - Contract Value
- E. Account Characteristic
Answer: D
NEW QUESTION 36
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control how the payoff balance is affected.
- B. They control if and how the General Ledger entries are created.
- C. They control how the current balance is affected.
- D. They control when a Financial Transaction is to be swept onto a bill.
- E. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
Answer: A,B,D
NEW QUESTION 37
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Deferred Monitor Calculation Algorithm
- B. the requesting system or user input
- C. the Usage Subscription Type
- D. the Usage Subscription BO
Answer: C
NEW QUESTION 38
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Terminate
- B. Low
- C. Complete
- D. Issue
- E. Information
Answer: A,D,E
NEW QUESTION 39
How many derived values can a final measurement have in addition to the primary measured value?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 40
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Device Type
- B. Measuring Component Type
- C. Usage Type
- D. Device Type and Measuring Component Type
- E. Device Configuration Type
Answer: E
NEW QUESTION 41
Approval Profiles control which aspects of an Adjustment?
- A. information defaulted on an Adjustment
- B. control how adjustments are approved
- C. if an adjustment requires approval before it's frozen
- D. whether the adjustment should appear on the customer's next bill
- E. whether current and/or payoff balance are affected by the adjustment
Answer: E
Explanation:
Reference:
%20Adjustment%20Approval.pdf
NEW QUESTION 42
Which two plug-in spots can call the rating functionality using base package-supplied algorithm types? (Choose two.)
- A. Billable Charge Template
- B. Bill Segment Type - Bill Segment Create
- C. Bill Segment Type - Bill Segment FT Creation
- D. Adjustment Type - Adjustment FT Creation
- E. Adjustment Type - Generate
Answer: C,D
NEW QUESTION 43
How many devices can be installed at a service point at an instance in time?
- A. up to three devices
- B. exactly one device
- C. one for each service type
- D. one for each measuring component
Answer: B
NEW QUESTION 44
When configuring the Get Scalar Details usage rule, which three attributes can be defined to retrieve scalar values? (Choose three.)
- A. Unit of Measure
- B. Service Point ID
- C. Device ID
- D. Time of Use
- E. Service Quantity Identifier
Answer: B,C,D
NEW QUESTION 45
Which business object performs critical validations whenever initial measurements are loaded?
- A. D1-IMDSeeder
- B. D1-IMDRetry
- C. D1-GenericIMDMain
- D. D1-IMDPeriod
- E. D1-IMDPreVEE
Answer: A
NEW QUESTION 46
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?
- A. Prepare for VEE
- B. Critical Validation
- C. VEE
- D. post-VEE
Answer: B
NEW QUESTION 47
What happens when a device's measuring components are reconfigured (a new measuring component will be read) at a service point?
- A. A device with a new configuration type is created. Moreover, a new installation event is created to 'install" (new device configuration).
- B. A device with a new configuration type is created.
- C. A new installation event is created to "install" (new device configuration).
- D. The original installation event is updated with the "removal" (expire old device configuration).
- E. The original installation event is updated with the "removal" (expire old device configuration) and a new installation event is created to "install" (new device configuration).
Answer: E
NEW QUESTION 48
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributes of a measuring component?
- A. Manufacturer and Model
- B. Channel ID and Badge Number
- C. Channel Multiplier and Channel ID
- D. Serial Number and Badge Number
- E. Model and Serial Number
Answer: D
NEW QUESTION 49
......
New (2022) Oracle 1z0-996-22 Exam Dumps: https://actualtests.realvalidexam.com/1z0-996-22-real-exam-dumps.html
